For Vehicles with Original Reverse Camera:
1. Open the Car Info app on your device’s desktop.
For Mercedes-Benz Android screens, open the NTG Setup app instead.
2. Navigate to:
General General Settings > Rear Camera Type
3. Select Original Rear Camera.
Kindly refer to the following images if needed
- camera type setting 1.png (401.65 KiB) Viewed 538 times
- camera type setting 2.png (40.56 KiB) Viewed 538 times
- camera type setting 3.png (132.54 KiB) Viewed 538 times
For Vehicles with Aftermarket Reverse Camera:
1. Verify Your Wiring:
Check the wiring connections and ensure they match the provided diagram.
- wiring.png (723.99 KiB) Viewed 538 times
2. Adjust the rear camera type based on the specifications of your aftermarket reverse camera:
For XTRONS CAM005 (PAL system), select Aftermarket Rear Camera or Aftermarket Rear Camera (PAL).
For XTRONS CAM009S (AHD system), select Aftermarket Rear Camera (AHD).
If you have any questions or need further assistance, contact our technical support team at [email protected].