If you are experiencing similar issues, follow these troubleshooting steps to resolve them.
Step 1: Check CAN Bus Connection
Ensure the CAN bus box is properly connected.
Verify that the CAN cable from the CAN bus box is plugged into the correct socket on the back of the unit.
- IAP92408PS Wiring Diagram.png (582.61 KiB) Viewed 2827 times
- ISO harness.png (663.65 KiB) Viewed 2827 times
- CANbus cable.png (223.93 KiB) Viewed 2827 times
Step 2: Adjust CAN Type Settings
By default, the CAN type setting is 127.PSA (Rcz), set the CAN type to 284.PSA SCR (Rzc).
1. Navigate to Settings → Car Infotainment → About Device
2. Click the gear icon in the upper right corner
3. Enter code 8878 and click OK
4. Under this CAN type, select from the available sub-options. Test different sub-options, save your settings, and restart the device after each change.
- CAN Setting.png (146.87 KiB) Viewed 2827 times
Step 3: Adjust Clock and Display Settings
To change the clock or other display settings, follow these steps:
Open the Car Info app from the unit desktop, then select Key Set.
Adjust the settings as needed.
- 2025-02-20_15-06-34.png (39.32 KiB) Viewed 2827 times
- 2025-02-20_15-06-43.png (44.92 KiB) Viewed 2827 times
Step 4: Ensure PDC Sound Works
The included CAN bus box has a built-in buzzer to output PDC sounds when reversing.
Check that the CAN bus box is correctly connected.
If there is still no sound, try different CAN type sub-options as mentioned in Step 2.
These steps should help restore communication with your dashboard display and ensure PDC sound works properly. If the issue persists, feel free to contact us at [email protected]