Troubleshooting for Reverse Camera on XTRONS Units

Technical Advices for Specific Questions / Functions

Moderator: Lukeeeuk

User avatar
xtrons
Site Admin
Posts: 61
Joined: Fri Dec 16, 2016 9:09 am

Troubleshooting for Reverse Camera on XTRONS Units

Postby xtrons » Tue Feb 28, 2017 7:50 am

Troubleshooting Noisy or Static Display of Reversing Cameras on Volkswagen / Audi / BMW head units with a Running Engine

Symptom of reverse camera failure
Backup camera image is static or jumpy.
Makes noise when engine is running but works fine when the engine is off.
No camera signal input to the screen.

Main cause
On most Volkswagen, Audi and BMW vehicles, the output voltage will cause interference once the engine is running and the reverse camera will be feed with impulse signal power. The impulse signal causes unstable voltage to the reverse camera instead of stable direct current, which in turn causes the camera not to work correctly.

How to fix it?
1. Get a rectifier for your camera and follow the wiring instruction below:
(A rectifier is an electrical device that converts AC to DC. AC occasionally reverses direction and DC flows in one direction only.)
Cam1.jpg
Cam1.jpg (41.49 KiB) Viewed 16245 times

2. Build a L-C or R-C filter for your reverse camera as shown in the diagram below or find more instruction online:
When choosing capacitor, ensure the capacitor voltage rating supports the voltage of your application. 110uF or 220uF is a good choice for C1 and 0.1uf ceramic capacitor for C2, also keep the resistance below 20Ω
cam2.jpg
cam2.jpg (42.21 KiB) Viewed 16245 times

3. Add a relay: This way is applicable for the vehicles with normal B+ power output.
The camera is fed by B+, the reverse camera control wire on the head unit will control the relay.
The following relay is most commonly found in stores:
cam3.png
cam3.png (114.69 KiB) Viewed 16245 times

Please use the following diagram:
1 is for parking lamp
2 is grounded
3 is for B+
5 is for the positive output of your reverse camera

If you still have any questions about connection of a rear view camera bought from XTRONS , please write to our technical support, and we will do our best to help you.

Return to “Technical Advice”

Who is online

Users browsing this forum: No registered users and 1 guest