GPS Set up For Custom Fit Series

[xtrons]

First, please insert the SD card into the GPS slot.
Please select GPS mode.
Clear the message "can't find Navigation" by pressing the screen.
Firstly you will need to select the route folder, press Set up or Settings, then choose navigation set up.
On this screen you will see a dialogue box, at the end of this box is a green or blue folder, you are required to select this icon.
Secondly Depending on which software you have you will need to follow one of the two processes below

For Sygic:
Double press-
1) Storage Card
2) Drive
3) Window CE
4) Drive.exe

You should now be taken back to the screen with the dialogue box, press the Home symbol in the top left corner.
Now select the Navigation Icon, the GPS software will begin to load, follow the first time set up procedures.

Please note for Sygic software the only available voice is English Betty.

Some suppliers use different software such as Kudos or iGo in cases like this the procedure is the same you are looking for the .exe file, once this file is located you will be taken back to the set up screen from here work back to the home screen to load the software.

Any inquires, please leave a message on XTRONS Forum or contact [email protected] for further advice, thanks.