Fine Tuning iGo8 GPS software

Technical Advices for Specific Questions / Functions

Moderator: Lukeeeuk

User avatar
xtrons
Site Admin
Posts: 61
Joined: Fri Dec 16, 2016 9:09 am

Fine Tuning iGo8 GPS software

Postby xtrons » Mon Jan 16, 2017 8:34 am

iGo8 seems to be the most popular software to use with your Xtrons stereo, here is a quick walk through to setting up the unit to achieve it's optimum performance.

From the Home screen access the settings menu
01.jpg
01.jpg (30.29 KiB) Viewed 8250 times

If your unit is set to Simple Mode you will not have this option at the bottom of the screen select Advanced Mode and follow the confirmations to activate it.
Regional Settings
02.jpg
02.jpg (33.48 KiB) Viewed 8250 times

In Regional Settings you can easily adjust the program language, voice profile, and whether you want you units in Kilometers/meter, Miles/feet, or Miles/yards. Our main concern in Regional Settings is the Time and Time Zone settings option.
03.jpg
03.jpg (32.53 KiB) Viewed 8250 times

If these options are not set correctly you may find you unit displaying the incorrect time, please set the options as pictured.
04.jpg
04.jpg (31.67 KiB) Viewed 8250 times

Next we need to calibrate the GPS receiver click back to the settings menu and select the arrow in the bottom right corner to access the second page of the settings.
05.jpg
05.jpg (32.91 KiB) Viewed 8250 times

Then choose the first option GPS
06.jpg
06.jpg (32.42 KiB) Viewed 8250 times

Now untick the GPS enabled Box, after a few seconds select the Autodetect option in the bottom right.
07.jpg
07.jpg (30.95 KiB) Viewed 8250 times

The unit will scan for the correct COM PORT and BAUD RATE
08.jpg
08.jpg (27.93 KiB) Viewed 8250 times

When calibration is finished select OK
09.jpg
09.jpg (28.63 KiB) Viewed 8250 times

Now head to the Map and select the Signal Icon in the bottom Left
10.jpg
10.jpg (28.42 KiB) Viewed 8250 times

Select GPS from the bottom right
11.jpg
11.jpg (31.59 KiB) Viewed 8250 times
10.jpg
10.jpg (28.42 KiB) Viewed 8250 times

This will open the Signal display from here you should see plenty of Green dots representing connected satellites The signal bars on the right tell you how strong the signal is the more Green dots and Green bars the more accurate the calculations will be.
12.jpg
12.jpg (37.85 KiB) Viewed 8250 times


Any inquires, please leave a message on XTRONS Forum or contact techsupport@xtrons.com for advise, thanks.

Return to “Technical Advice”

Who is online

Users browsing this forum: No registered users and 2 guests