Here is a detailed instruction on how to connect the receiver with XTRONS head units, and also a step by step guide on how to install the sensors with your vehicles’ tires.
1. Receiver Installation
Note: The receiver must be 20cm away from sources of interference such as car stereo, navigation, and mobile TV. Avoid winding the cable or putting the receiver on the top of the car stereo.
2. Sensor Installation
a) Remove the tire valve cap.
b) Screw in the hexagon nut.
c) Screw the LR sensor onto the LR tire valve stem tightly.
d) Spin the hexagon nut counterclockwise tightly by the supplied spanner.
e) Make sure there is no air leak from the stem.
f) Following the above step to install other sensors.
3. Battery Replacement
a) Separate the hexagon nut from sensors using the supplied spanner.
b) Remove the sensor from the tire valve.
c) Unscrew lid counterclockwise from sensor housing using spanner.
d) Remove the old battery and insert a new one with the plus (+) and minus (-) poles orientated properly.
e) Screw the lid tightly onto the sensor housing. Screw the sensor onto the tire valve and fix with the hexagon nut.
Important Information: Please keep in mind that the following XTRONS head units support TPMS, and you need to order XTRONS TPMS01 to use the TPMS function on the units: PF75FSFAP-B, PF75FSFAP-S, PF75QSFAP-S, PF75QSFAP-B, PF7546BAP, PF7553BAP, PF7590BAP, PF75AA3AP, PF75AA4AP, PF75ATTAP, PF75AA3ARP, PF75AA4ARP, PF75ATTARP, PF75JCCAP, PF75FFFAP, PF7539BAP, PF75HGTAP, PF75MTWAP, PF85MTVAP, PF75M203AP, PF75M211AP, PF75M245AP, PF75M164AP, PF9LMTVAP, PF75M209AP, PF75M220AP, PF75TRVAP, TL702AP, PF7581BAP, TL702AP, PL91MTVAP.
If you have any other questions, please leave messages here or contact with XTRONS support via email@example.com for advices.
Who is online
Users browsing this forum: No registered users and 0 guests