TE706PL wiring

Help & Advises for XTRONS Single & Double Din
bolter
Posts: 7
Joined: Tue Jul 03, 2018 12:06 am

TE706PL wiring

Postby bolter » Mon Sep 03, 2018 7:46 am

I have purchased the following a te706pl head unit and a ICE/ACS/12-228 Volvo 1993+ iso cable which attaches to a 850 GLT Volvo wiring. I have soldered all the cables from the iso cable to the cable that came with the head unit, but I have 1 wire left over which is the auto antenna. which wire on the original wiring for the head unit does this attach to? :(

User avatar
xtrons
Site Admin
Posts: 86
Joined: Fri Dec 16, 2016 9:09 am

Re: TE706PL wiring

Postby xtrons » Mon Sep 03, 2018 7:57 am

Hi,
It needs to be connected to AUTO ANT blue wire from the ISO harness.
If you would like any further information please do not hesitate to contact us again.

Kind regards

XTRONS

bolter
Posts: 7
Joined: Tue Jul 03, 2018 12:06 am

Re: TE706PL wiring

Postby bolter » Mon Sep 03, 2018 10:06 am

Sorry if I have you confused, I have the blue wire from the ISO harness, which wire on the harness that came with the head unit does it attach to? (what does the label on the wire say)

bolter
Posts: 7
Joined: Tue Jul 03, 2018 12:06 am

Re: TE706PL wiring

Postby bolter » Sat Sep 08, 2018 7:33 am

I have 5 wires left after doing the wiring
GND
KEY 1
KEY 2
BACK CAR
AND ANTENNA
The only problem is the antenna wire is connected into the iso block that came with the radio and the wire goes nowhere (just loose). I am not using the iso block (I have cut the wires from this and soldered to original wiring) So from car original wiring, where does this wire go to so when I turn the radio on the antenna goes up?

Everything else works fine, but how do I get antenna to go up and down?

bolter
Posts: 7
Joined: Tue Jul 03, 2018 12:06 am

Re: TE706PL wiring

Postby bolter » Sun Sep 16, 2018 4:15 am

Closed - all sorted


Return to “Head Units”

Who is online

Users browsing this forum: No registered users and 2 guests