XTRONS TPMS01 Installation Guide

Pictures and Guidances on Installation
User avatar
xtrons
Site Admin
Posts: 96
Joined: Fri Dec 16, 2016 9:09 am

XTRONS TPMS01 Installation Guide

Postby xtrons » Thu Jan 12, 2017 8:00 am

In order to increase your driving safety and provide you with a better understanding of your vehicle’s tire conditions, XTORNS has applied the TPMS (Tire Pressure Monitoring System) to many of its Android car DVD series. After you have correctly installed the TPMS, you can get real-time statistics to the receiver; therefore, you can see the real-time data of your vehicles’ tires on XTRONS head units.
Here is a detailed instruction on how to connect the receiver with XTRONS head units, and also a step by step guide on how to install the sensors with your vehicles’ tires.
1. Receiver Installation
1.jpg
1.jpg (851.28 KiB) Viewed 5630 times

2.jpg
2.jpg (845.8 KiB) Viewed 5630 times

3.jpg
3.jpg (841.86 KiB) Viewed 5630 times

Note: The receiver must be 20cm away from sources of interference such as car stereo, navigation, and mobile TV. Avoid winding the cable or putting the receiver on the top of the car stereo.

2. Sensor Installation
a) Remove the tire valve cap.
4.jpg
4.jpg (129.89 KiB) Viewed 5630 times

b) Screw in the hexagon nut.
5.jpg
5.jpg (82.59 KiB) Viewed 5630 times

c) Screw the LR sensor onto the LR tire valve stem tightly.
6.jpg
6.jpg (90.89 KiB) Viewed 5630 times

d) Spin the hexagon nut counterclockwise tightly by the supplied spanner.
7.jpg
7.jpg (74.22 KiB) Viewed 5630 times

e) Make sure there is no air leak from the stem.
8.jpg
8.jpg (101.22 KiB) Viewed 5630 times

f) Following the above step to install other sensors.

3. Battery Replacement
a) Separate the hexagon nut from sensors using the supplied spanner.
9.jpg
9.jpg (72.18 KiB) Viewed 5630 times

b) Remove the sensor from the tire valve.
10.jpg
10.jpg (65 KiB) Viewed 5630 times

c) Unscrew lid counterclockwise from sensor housing using spanner.
11.jpg
11.jpg (49.7 KiB) Viewed 5630 times

d) Remove the old battery and insert a new one with the plus (+) and minus (-) poles orientated properly.
12.jpg
12.jpg (75.27 KiB) Viewed 5630 times

e) Screw the lid tightly onto the sensor housing. Screw the sensor onto the tire valve and fix with the hexagon nut.
13.jpg
13.jpg (49.45 KiB) Viewed 5630 times

Important Information: Please keep in mind that the following XTRONS head units support TPMS, and you need to order XTRONS TPMS01 to use the TPMS function on the units: PF75FSFAP-B, PF75FSFAP-S, PF75QSFAP-S, PF75QSFAP-B, PF7546BAP, PF7553BAP, PF7590BAP, PF75AA3AP, PF75AA4AP, PF75ATTAP, PF75AA3ARP, PF75AA4ARP, PF75ATTARP, PF75JCCAP, PF75FFFAP, PF7539BAP, PF75HGTAP, PF75MTWAP, PF85MTVAP, PF75M203AP, PF75M211AP, PF75M245AP, PF75M164AP, PF9LMTVAP, PF75M209AP, PF75M220AP, PF75TRVAP, TL702AP, PF7581BAP, TL702AP, PL91MTVAP.

If you have any other questions, please leave messages here or contact with XTRONS support via techsupport@xtrons.com for advices.

Return to “Installation Guides”

Who is online

Users browsing this forum: No registered users and 1 guest