A majority of Audi’s come equipped with the BOSE speaker system, which uses an external amplifier to power the speakers.
If your Audi does have the BOSE speakers, you will need to connect the amplifier control cable in the ISO wiring harness with the amplifier control cable in the RCA cable.
If your vehicle does not have the BOSE system, but has the audio port as the below picture shows, you will still be required to make some modifications to the wire connections. If you do not, your rear speakers will NOT have sound.
For the wire connections, please refer to the following guides and pictures.
There are only two wires in your car’s audio port which control the front two speakers. After connecting these two wires to the XTRONS head unit speaker wires, your car’s two rear speakers won’t have sound.
To enable the sound in the two rear speakers, you need to disconnect the two wires in the below picture, and order an extra speaker adapter cable to connect the two wires with the two rear speakers of your car.
For any further questions you can leave a message on the XTRONS forum or send an email to XTRONS tech support via firstname.lastname@example.org.
I recently bought Xtrons ICE/HU/PDAB71A4A for Audi A4/S4.I am happy with the unit overall.But as you know my rear speakers are not working and my factory sub woofer too.From this guide I can not understand exactly which cables and connections I need to redo in order to have sound on all my speakers/subs.
Please send me a detailed explanation of what and how to do it if you kindly please.
I recently bought XTRONS unit for Audi A4.(ICE/HU/PDAB71A4A).As you may know my rear speakers are not working and my subwoofer in the boot as well.I do not have BOSE sound system.From your guide I can not understand what and which wires and connections to redo,so please be kind and send me detailed information of what and how to get the most of the player.
Who is online
Users browsing this forum: No registered users and 1 guest